Hard Reset for P3-X

The hard reset will allow you to fix you P3-X when it would crash or freeze up

1. You would first need to get a small pin or a paper clip and then you would insert it to the reset button that is located on the right side of the projector and press on it. The location of the reset button on the projector as shown below:




2. After you press the reset button it should fix your P3-X and you would turn the projector back on
3. Now your P3-X is ready to be used again
4. If you have done these steps and there is still a problem with your P3-X, please contact AAXA Technical Support either by email or by phone for further assistance.