The instructions below are for Windows XP to Windows 10. The instructions should be similar for each. Please follow the steps below to connect your computer to your projector.


1. Using either the supplied VGA cable or a standard HDMI cable, connect each end of the cables to each the P7 and your computer.

2. Once connected, turn on the P7. On the menu screen, select the external input cable option.

3. Then, select the HDMI or VGA option depending on how you have connected it.

4. On your computer screen, it may have already automatically connected through the HDMI, but you can adjust the setting to fit your needs. If you have Windows 7, press and hold down the Windows Key (the key with a windows flag) and then while holding down that key, press "P". You can then set it the following ways:

• Computer Only - Disconnect your projecting screen

• Duplicate - Mirror your computer screen with what's projecting

• Extend - Make the projection an extension of your computer screen

• Projector Only - Only operate your computer on the projected screen and nothing on your computer screen

5. For Windows 10, please make sure the Multiple displays has the “Duplicate these displaysâ€